2007 Jeep Wrangler Differential Rebuild Kit Parts

Choose your Submodel for your 2007 Jeep Wrangler

Rubicon Sahara Unlimited Rubicon Unlimited Sahara Unlimited X X

Showing 1 - 10 of 17 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2007 Jeep Wrangler Differential Rebuild Kit - Front Spicer

DIFFERENTIAL BEARING OVERHAUL KIT
with Overhaul Kit with 186mm Diameter Ring Gear with Dana Model Super 30 Axle with Master Overhaul Kit - Includes Shims and Ring Gear Bolts
FSGR
Product Attributes:
- Rebuild Kit Type: Master Overhaul
- Gear Ratio: All Ratios
- Production Date: 2007-2018 Jk
- Pinion Nut Included: Y
- Marking Compound Included: N
- Axle Model: Dana 30
- Shims Included: Y
- Bearing Type: Tapered Roller Bearing
Features:
- Highest quality mix of bearings, cups and cones, each precisely selected for maximum performance in every position and application.
- Premium oil seals for your best protection against nagging leaks and damaging contamination.
- All the small parts to do the job right, including sealant, snap rings, gasket, shims, ring gear bolts and more.
- Production upgrades that ensure genuine Spicer parts are as good as - or better than - the OE parts they replace.
Genuine Spicer master differential overhaul kits include all the latest production upgrades, so the parts you're installing are as good - or better - than the part that originally came with your vehicle. Choose Spicer master differential overhaul kits for our most comprehensive offering - complete with everything you need for a thorough and lasting repair.

Additional Fitment Information:

Vehicle	Position
2007 - Jeep Wrangler	Front

14 In Stock

$349.75 CAD

$419.70 CAD

Brand	Spicer
Part #	DSP2017378
Condition	New
Warehouse	B

UPC: 00023913124915

2007 Jeep Wrangler Differential Rebuild Kit Crown Automotive

Front; Includes Gear Set And Ring Gear Bolts; For Use w/Dana 30
Differential Gear Kit; Front; Includes Gear Set And Ring Gear Bolts; For Use w/Dana 30;
Differential Gear Kit
Product Attributes:
- WARNING CA Proposition 65: No
- Model: Dana 30 Standard
Features:
- Differential Gear Kit
Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.

Additional Fitment Information:

Vehicle
2007 - Jeep Wrangler

1 In Stock

$181.45 CAD

$217.74 CAD

Brand	Crown Automotive
Part #	C1Y68004075AA
Condition	New
Warehouse	B

2007 Jeep Wrangler Differential Rebuild Kit - Rear Crown Automotive

1/2 in. Bolts; For Use w/Dana 44
Differential Gear Set; Rear; 1/2 in. Bolts; For Use w/Dana 44;
Differential Gear Set
Product Attributes:
- WARNING CA Proposition 65: No
- Model: Dana 44 Standard 30 Spline
Features:
- Differential Gear Set
Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.

Additional Fitment Information:

Vehicle	Position
2007 - Jeep Wrangler	Rear

14 In Stock

$189.13 CAD

$226.96 CAD

Brand	Crown Automotive
Part #	C1Y68035575AA
Condition	New
Warehouse	B

2007 Jeep Wrangler Differential Rebuild Kit - Front Spicer

DIFFERENTIAL BEARING OVERHAUL KIT
with 186mm Diameter Ring Gear with Dana Model Super 30 Axle with Master Overhaul Kit - Includes Shims and Ring Gear Bolts with Overhaul Kit
FSGR
Product Attributes:
- Rebuild Kit Type: Master Overhaul
- Gear Ratio: All Ratios
- Production Date: 2007-2018 Jk
- Pinion Nut Included: Y
- Marking Compound Included: N
- Axle Model: Dana 30
- Shims Included: Y
- Bearing Type: Tapered Roller Bearing
Features:
- Highest quality mix of bearings, cups and cones, each precisely selected for maximum performance in every position and application.
- Premium oil seals for your best protection against nagging leaks and damaging contamination.
- All the small parts to do the job right, including sealant, snap rings, gasket, shims, ring gear bolts and more.
- Production upgrades that ensure genuine Spicer parts are as good as - or better than - the OE parts they replace.
Genuine Spicer master differential overhaul kits include all the latest production upgrades, so the parts you're installing are as good - or better - than the part that originally came with your vehicle. Choose Spicer master differential overhaul kits for our most comprehensive offering - complete with everything you need for a thorough and lasting repair.

This Part Fits the Following OEM/Substitute Numbers:

DS2017378

Additional Fitment Information:

Vehicle	Position
2007 - Jeep Wrangler	Front

14 In Stock

$349.75 CAD

$419.70 CAD

Brand	Spicer
Part #	DSP2017378
Condition	New
Warehouse	B

UPC: 00023913124915

2007 Jeep Wrangler Differential Rebuild Kit - Rear Crown Automotive

Includes Pinion/Carrier Bearings/Crush Sleeve/Oil Seals/Cover Gasket/Axle Shaft Seals/Bearings; For Use w/Dana 35
Differential Master Overhaul Kit; Rear; Includes Pinion/Carrier Bearings/Crush Sleeve/Oil Seals/Cover Gasket/Axle Shaft Seals/Bearings; For Use w/Dana 35;
Differential Master Overhaul Kit
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm; Http://www.p65warnings.ca.gov/
- Model: Dana 35 Standard
Features:
- Differential Master Overhaul Kit
Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.

Additional Fitment Information:

Vehicle	Position
2007 - Jeep Wrangler	Rear

4 In Stock

$351.87 CAD

$422.24 CAD

Brand	Crown Automotive
Part #	C1YD35MASKIT
Condition	New
Warehouse	B

2007 Jeep Wrangler Differential Rebuild Kit 6 Cyl 3.8L Yukon Gear

Yukon Master Overhaul kit for Dana 30 reverse rotation diff for use with+07 JK
Dana; For Use w/Reverse Rotation Diff Dana 30~Dana 30 JK Front; Differential Rebuild Kit; Timken Bearings; Includes Inner Axle Seals
Yukon Master Overhaul kits give you all the high quality parts you need to start/finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Yukon Differential Master Overhaul Kit
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
- Model:
  - Dana 30 Reverse
  - Dana 30 Standard
Features:
- Fits Dana Spicer 30 JK
- Includes Are Timken Bearings And Races Along w/High Quality Seals And Small Parts
- Includes Carrier Bearings/Races
- Pinion Bearings/Races
- Pinion Seal
- Axle Seals
- Complete Shim Kit
- Ring Gear Bolts
- Includes Pinion Nut
- Crush Sleeve
- Oil Baffles/Slingers
- Thread Locker
- Marking Compound w/Brush And Gasket
Yukon Master Overhaul Kits give you all the high-quality parts you need to start and finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Yukon Master Overhaul Kits are the most comprehensive and complete kits on the market because Yukon does extensive research to ensure that every kit has everything you need for your application.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	Drive Type	CID
2007 - Jeep Wrangler	V	3778	6 Cyl 3.8L	Unlimited Sahara	4WD	231

13 In Stock

$612.06 CAD

$734.47 CAD

Brand	Yukon Gear
Part #	Y11YK D30-JK
Condition	New
Warehouse	B

2007 Jeep Wrangler Differential Rebuild Kit 6 Cyl 3.8L Yukon Gear

Yukon Master kit for Dana 44 rear diff for use with new 07+non-JK Rubicon.
Dana 44; Pin Seal; Crush Sleeve; Pinion Depth Shims; Carrier Shims; Marking Compound; PinNut; ORing; Slinger; Gasket; Ring Gear Bolts Dana 44; Non-Rubicon JK; Pin Seal; Crush Sleeve; Pinion Depth Shims; Carrier Shims; Marking Compound; PinNut; ORing; Slinger; Gasket; Ring Gear Bolts
Yukon Master Overhaul kits give you all the high quality parts you need to start/finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Yukon Differential Master Overhaul Kit
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
- Model: Dana 44 Standard 30 Spline
Features:
- Fits Dana Spicer 44 JK Non-Rubicon Rear
- Includes Are Timken Bearings And Races Along w/High Quality Seals And Small Parts
- Includes Carrier Bearings And Races
- Pinion Bearings/Races
- Pinion Seal
- Complete Shim Kit
- Crush Sleeve
- Includes Ring Gear Bolts
- Pinion Nut
- Oil Baffles/Slingers
- Thread Locker
- Marking Compound w/Brush And Gasket
Yukon Master Overhaul Kits give you all the high-quality parts you need to start and finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Yukon Master Overhaul Kits are the most comprehensive and complete kits on the market because Yukon does extensive research to ensure that every kit has everything you need for your application.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
2007 - Jeep Wrangler	V	3778	6 Cyl 3.8L	Rubicon	231

7 In Stock

$755.54 CAD

$906.65 CAD

Brand	Yukon Gear
Part #	Y11YK D44-JK-STD
Condition	New
Warehouse	B

2007 Jeep Wrangler Differential Rebuild Kit 6 Cyl 3.8L Yukon Gear

Yukon Master kit for Dana 44 rear diff for use with new 07+non-JK Rubicon.
Dana 44; Pin Seal; Crush Sleeve; Pinion Depth Shims; Carrier Shims; Marking Compound; PinNut; ORing; Slinger; Gasket; Ring Gear Bolts Dana 44; Non-Rubicon JK; Pin Seal; Crush Sleeve; Pinion Depth Shims; Carrier Shims; Marking Compound; PinNut; ORing; Slinger; Gasket; Ring Gear Bolts~Dana 44. Non-Rubicon JK; Differential Rebuild Kit; Timken Bearings; 25523 / 25590 Carrier Bearings
Yukon Master Overhaul kits give you all the high quality parts you need to start/finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Yukon Differential Master Overhaul Kit
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
- Model: Dana 44 Standard 30 Spline
Features:
- Fits Dana Spicer 44 JK Non-Rubicon Rear
- Includes Are Timken Bearings And Races Along w/High Quality Seals And Small Parts
- Includes Carrier Bearings And Races
- Pinion Bearings/Races
- Pinion Seal
- Complete Shim Kit
- Crush Sleeve
- Includes Ring Gear Bolts
- Pinion Nut
- Oil Baffles/Slingers
- Thread Locker
- Marking Compound w/Brush And Gasket
Yukon Master Overhaul Kits give you all the high-quality parts you need to start and finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Yukon Master Overhaul Kits are the most comprehensive and complete kits on the market because Yukon does extensive research to ensure that every kit has everything you need for your application.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	Drive Type	CID
2007 - Jeep Wrangler	V	3778	6 Cyl 3.8L	Unlimited X	RWD	231

7 In Stock

$755.54 CAD

$906.65 CAD

Brand	Yukon Gear
Part #	Y11YK D44-JK-STD
Condition	New
Warehouse	B

2007 Jeep Wrangler Differential Rebuild Kit 6 Cyl 3.8L Yukon Gear

Yukon Master kit for Dana 44 rear diff for use with new 07+non-JK Rubicon.
Dana 44; Pin Seal; Crush Sleeve; Pinion Depth Shims; Carrier Shims; Marking Compound; PinNut; ORing; Slinger; Gasket; Ring Gear Bolts Dana 44. Non-Rubicon JK; Differential Rebuild Kit; Timken Bearings; 25523 / 25590 Carrier Bearings~Dana 44; Non-Rubicon JK; Pin Seal; Crush Sleeve; Pinion Depth Shims; Carrier Shims; Marking Compound; PinNut; ORing; Slinger; Gasket; Ring Gear Bolts
Yukon Master Overhaul kits give you all the high quality parts you need to start/finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Yukon Differential Master Overhaul Kit
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
- Model: Dana 44 Standard 30 Spline
Features:
- Fits Dana Spicer 44 JK Non-Rubicon Rear
- Includes Are Timken Bearings And Races Along w/High Quality Seals And Small Parts
- Includes Carrier Bearings And Races
- Pinion Bearings/Races
- Pinion Seal
- Complete Shim Kit
- Crush Sleeve
- Includes Ring Gear Bolts
- Pinion Nut
- Oil Baffles/Slingers
- Thread Locker
- Marking Compound w/Brush And Gasket
Yukon Master Overhaul Kits give you all the high-quality parts you need to start and finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Yukon Master Overhaul Kits are the most comprehensive and complete kits on the market because Yukon does extensive research to ensure that every kit has everything you need for your application.

This Part Fits the Following OEM/Substitute Numbers:

ZK D44-JK-STD

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	Drive Type	CID
2007 - Jeep Wrangler	V	3778	6 Cyl 3.8L	Unlimited X	RWD	231

7 In Stock

$670.20 CAD

$804.24 CAD

Brand	Yukon Gear
Part #	Y11YK D44-JK-STD
Condition	New
Warehouse	B

2007 Jeep Wrangler Differential Rebuild Kit 6 Cyl 3.8L Yukon Gear

Yukon Master kit for Dana 44 rear diff for use with new 07+non-JK Rubicon.
Dana 44; Pin Seal; Crush Sleeve; Pinion Depth Shims; Carrier Shims; Marking Compound; PinNut; ORing; Slinger; Gasket; Ring Gear Bolts Dana 44; Non-Rubicon JK; Pin Seal; Crush Sleeve; Pinion Depth Shims; Carrier Shims; Marking Compound; PinNut; ORing; Slinger; Gasket; Ring Gear Bolts
Yukon Master Overhaul kits give you all the high quality parts you need to start/finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Yukon Differential Master Overhaul Kit
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
- Model: Dana 44 Standard 30 Spline
Features:
- Fits Dana Spicer 44 JK Non-Rubicon Rear
- Includes Are Timken Bearings And Races Along w/High Quality Seals And Small Parts
- Includes Carrier Bearings And Races
- Pinion Bearings/Races
- Pinion Seal
- Complete Shim Kit
- Crush Sleeve
- Includes Ring Gear Bolts
- Pinion Nut
- Oil Baffles/Slingers
- Thread Locker
- Marking Compound w/Brush And Gasket
Yukon Master Overhaul Kits give you all the high-quality parts you need to start and finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Yukon Master Overhaul Kits are the most comprehensive and complete kits on the market because Yukon does extensive research to ensure that every kit has everything you need for your application.